Building Sand Table Model Tools Electrostatic Grass Planter Craft Flocking Applicator Machine Battery | Инструменты

Building Sand Table Model Tools Electrostatic Grass Planter Craft Flocking Applicator Machine Battery | Инструменты

- The casing is made of fine quality ABS engineering material and is made of superior welding technology, firm and solid, with strong flocking power, and overlong working life.

- Flocking is powerful, lightweight and easy to use.

- Mini flocking machine, handy and portable with artistic shape.

- Perfect machine to make grass flocking for plantings models, landscape models, construction models.

- Lightweight and portable, easy to operate and can provides long service time.

- Humanized antiskid handle in suitable size for comfortable grip, circuit inside the handle is with low power dissipation and high voltage output, makes this flocking machine quite strong flocking capacity.

- Specially design for flocking in small area, sand table construction model, and other DIY scenes.
 

* Charge the battery before using and check if the wire inside the container is in contact with the wire mesh.

* This is the pitch control button.

* Put in the grass powder.

* It has been suggested that the length of the grass powder is more than 5 mm, which is more effective.

* Then tighten the lid.

*On the target model and on the table, pull out the white latex and spread it evenly, ready to start dusting with grass powder.

* Touch the target surface of the platform with the negative electrical connector as close as possible, then use the seeder grass to start spraying the grass powder 2-3 cm away from the platform target.

* After the grass dust is completed, pour the grass powder or powder supplement and blot it with a vacuum cleaner model.

Cut the haystack with small scissors and a toothpick until it grows evenly.
 

Name: Static Grass Flocking Applicator Set

Material: ABS

Battery: 2 * AA battery (excluded)

Rated working voltage: DC 3V

Rated working power: 0.15W

Rated output voltage: ≥DC3000V

Rated working current: 50mA

1 * Brush

1 * Static Grass

1 * Static Grass Applicator

1 * Guideline
 

1. Do not use the negative terminal to contact them with the wire mesh, there is a danger caused by sparks!

2. Use limit of less than 16 years old!

3. Remove the battery and place it high when not in use.

4. Static grass original screen applicator is suitable for 3-5mmstatic Grass.

5. Powered by 2 * AA battery, you should prepare it by yourself.