Волоконно-оптический SC/APC модель 2308 Тип разъема/FTTH быстрый разъем лучшее качество

 

 

 

Description

Quick Assembly Connector (also named “ No-Polish Connector ” , “Pre-polish Connector” or “ Fast Connector ”) is an easy-to-install device. No tool or jig is required. It is universal for 250um /900um / 2.0mm / 3.0mm / Flat Cable.

it was designed for fast termination with pre-polished connector. Using V groove technology, it requires no epoxy. With transparent body, the connecting result can be seen by Fiber Checker immediately. This is an ideal solution, either for outside plant or inside a building.

Optic Fiber Fast Connector  1.Simple structure  2.Save time  3.Low insertion loss.   Feature  1. Based on the pluggable non-preset tube technology  2. Precision ceramic components with co-axial self centering, Excellent and durable optical property  3. Optical fiber fits axially in elastic way and avoids completely any false connect  4. Triple clamping through the naked fiber, tight buffer and cable, etc., can be used as patchcord  5. High on-line tensile strength of Optical Fast Connector after terminating, always keep connecting    under the force from cabling and drawing.  6. Integrated protection of the casing to withstand harsh user environment.  7. Directly connectable with ONU without any optical socket, which reduces FTTH cost.  8. High success rate and easiness in installation with average splicing time 100 sec  9. Lower requirement for the habit working and work environment call for to the builder.  10. Visible Installation quality; independent from any far end light source and special device satisfying cabling construction in any sectioned way. 

Specification

ITEM Technical Parameters Applicable for 3.1 x 2.0 mm Drop cable Optical fiber diameter 125μm ( 657A & 657B ) Tight buffer diameter 250μm Fiber mode  Single mode Operation time About 100s(no fiber cut) Insert loss ≤ 0.3dB(1310nm & 1550nm) Return loss ≥40dB Fastening strength of naked fiber >5 N Fastening strength of naked fiber holder >10 N Tensile strength >50 N Using temperature -40~+80°C On-line tensile strength (20 N)  IL ≤ 0.2dB  RL ≤ 5dB Mechanical durability (500 times) IL ≤ 0.2dB  RL ≤ 5dB Drop-off test (drop-off height 4m, once per direction, totally 3 times)  IL ≤ 0.2dB  RL ≤ 5dB