Full open source Low cost Horus software mini 3D scanner DIY kit new red injection molding parts for 3d printer | Инструменты

Full open source Low cost Horus software mini 3D scanner DIY kit new red injection molding parts for 3d printer | Инструменты

Full open source Low cost Horus software mini 3D scanner DIY kit

3d scanner suitable scan items:

1. Opaque objects

2. The weight of the object is less than 3 KG

3. The volume of the object is larger than 5x5CM (space diameter and height).

4. The volume of object is less than 20.3x20.3CM

5, the object is stable.

3D scanner is difficult to scan objects.

1. Transparent objects (glass, organic plastics, etc.)

2, luminous or strong reflective objects.

3. Objects less than 5x5 cm in volume

4. Very dark objects and obscure objects (such as stuffed toys, black objects).

3D scanner does not scan objects.

1. Objects larger than 20.3x20.3CM

2. Moving objects

3. Weight more than 3 kg.

Packing List：

1, 1* uno control panel

2, 1*ZUM Scan extension board

3, 1 * A4988

4, 1* C270 camera

5, 2 * laser

6, 1* 42 motors

7, 1 * 16014 bearing

8, 1 times 12V, 2A power supply

9. 1*200mm acrylic platform

10, 1* acrylic calibration plate

11, 1* calibration paper

12, 1* black bandM8

13, 2 * * 400 mm screw

14, 4 * M8 * 170 mm screw

15, 1 * M8 * 290 mm screw

16, M3 * 10 * 10 screws

17, 6 * M3 nut

18, 3 * M8 * 10 mm screw

19, 28 * M8 nut

20, 18 * M8 gasket

21, 1 set of printings

22, installation/use instructions and video, companion software and source code

RE: desktop 3D scanners are not suitable for sweeping irregular complex objects and cannot be compared with industrial 3D scanners.Only objects that are close to the cylinder will be more effective.Scanning quality has a lot to do with objects, environment and light, so it is recommended to scan in our constant light and shadow studio.

Note: installation requires a certain amount of manual ability.