Universal 30KG Adjustable TV Wall Mount Bracket Flat Panel Frame Support 15 Degrees Tilt with Level for 26 - 55 Inch LCD LED | Электроника

Universal 30KG Adjustable TV Wall Mount Bracket Flat Panel Frame Support 15 Degrees Tilt with Level for 26 - 55 Inch LCD LED | Электроника

Type: Adjustable Type

Applicable Size: 26 - 55 inches

Max Capacity: 30KG

Up and Down Tiltable Angle: 15 degrees

Material: SPHC Steel

Distance From the Wall: 52MM

VESA Standard Pitch: 25 x 60mm, 100 x 100mm, 200 x 200mm, 400 x 400mm

Left and Right Tiltable Angle: Does not apply

Colour: Black

Feature:
- The one-piece panel is simple and easy to operate.
- High-temperature baking painted, no paint off or rusted.
- The key parts are thickened, the structure is stable, and the ability to withstand weight is strong.
- Iron material design,with good flexibility, scratch resistance,beautiful appearance.
- High-intensity rotating shaft that can withstand multiple rotations without deformation.
- Pitch adjustment vision, it can be adjusted freely 15 degrees up and down, experience different visual effects.
- Safety screw design ensures no offset under load.
- Application Scope: Fit for most HDTV flat panel TV, LCD TV, LED TV, fit for Plasma TV. fit for Sony / Samsung / TCL / PHILIPS / Sharp-AQUOS / Plasma TV. Suitable For family, entertainment, public places and commercial places such as living room, KTV, bars, airports, railway stations, bus stations, shopping malls, stores waiting hall, lounge, large conference rooms, classrooms, lobby and restaurants.

Installation and operation instructions:
- 1. Use the wall plate as a templet to drill four holes of 10mm diameter and 50mm depth in the concrete wall. Then wedge four plastic concrete anchors into the holes.
- 2. Install the wall plate, Putthe wall plate on the wall,and then screw four lag bolts into each plastic concrete anchor through metal washer to four the lag bolt,the plastic concrete anchor and the wall.
- 3. Install the monitor brackets onto the back of the panel TV: screw four bolts into the holes in the back of the panel TV Make sure the distance from each bracket to the top of the panel TV is equal,and also as center as possible.The parts shall be selected according to the dimensions of the holes in the back of the panel TV.
- 4. Adjust the angel ofthe LCD between -5°~+5° to a suitable position by hands.

Note:
- There are many types of screws available for most TV sets. You only need to choose the right screw from the rack accessories.
- When purchasing, please check whether the hole spacing of your TV set is consistent with this product and whether the weight is within the tolerance range of this product.
- The quantity of product accessories will be somewhat deviant, but it will not affect installation and usage.

1 x TV Stand

1 x Installation Accessories