Hydraulic Copper Busbar Bending Machine Metal Sheet Tool CB-150D 16T 150mm | Инструменты

Hydraulic Copper Busbar Bending Machine Metal Sheet Tool CB-150D 16T 150mm | Инструменты

Parameter:
Model: CB-150D
Tonnage: 16T
Bending width: 150mm
Bending thickness:10mm
Bending capability: 150*10mm
Minimum bending angle: 90 degree

Features:
1,Suitable for switch boxes, power strips, automatic control panel wiring project, the use of separate and easy to carry;
 2.Copper or aluminum row bending angle of 90 degrees to the right, without prejudice to the copper material lighter;
3.Separate operation, with a variety of pump operation;
4.The curved Busbar maximum size of 10mm × 150mm;
5.The machine is equipped with adjustable balance bar to facilitate the use of small copper;
6.On the base of the unit is marked with the mark, the bending angle for an operator to control their own;
7.The machine large tonnage, curvature of large, good electrical conductivity, minimum bending angle of 90 °.
8.Type Horizontal latest output 20TON copper width 150mm Maximum thickness 10mm
9.CB-150D is a portable, while bending the copper bar, N-shaped or L-shaped card can be tied to split
Out, you can row out unimpeded;
10.There is a predetermined angle of 90 degrees, 45 degrees directions, to avoid excessive design;
11.Match pump CP-700, CP-700-2A, DYB-63A, ZCB-700A

Package Included:
1x Hydraulic Copper Busbar Bender