3044196 Electronic Governor Speed Control Unit For Generator | Обустройство дома

3044196 Electronic Governor Speed Control Unit For Generator | Обустройство дома

speed governor 3044196

General Description

Cummins Speed control unit information for the speed governor is usually received from a magnetic speed sensor. Any other signal generating device may be used provided the generated fre- quency is proportional to engine speed and meets the voltage input and frequency range specification. The speed sensor is typically mounted in close proximity to an engine driven ferrous gear, usually the engine ring gear. As the teeth of the gear pass the magnetic sensor, a signal is generated which is propor-tional to engine speed.

The 3044196 speed controller is an all electronic device designed to control engine speed with fast and precise
response to transient load changes. This closed loop control,when connected to a proportional electric actuator and sup-plied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode. It is designed for high reliability and built ruggedly to withstand the engine environment.  

Tecnical Data

SPECIFICATION:  

RPM Stability: 

<±0.25% 

Speed Range: 

1KHz ~ 6.5KHz 

Thermal Stability: 

Max ±0.7% 

IDLE Regulation: 

260 ±20Hz 

DROOP Regulation: 

Minimum 15Hz ±6Hz/ 1 Amp 

Maximum:  400Hz ±75Hz/ 1 Amp 

External Speed Regulation:  

±200Hz  (with 1 KΩ connected) 

AUX Input Sensitivity:  

148Hz / 1V., ±10Hz 

Impedance: 

1MΩ 

Working Temp Range: 

-40 ~ 85 °C

ENVIRONMENT: 

Working Humidity Range:  

Maximum 95% 

Stocking Temp: 

-55 ~ 92 °C

Shocking: 

20-100HZ  500mm/Sec. 

INPUT POWER SUPPLY:

Voltage: 

12V or 24V 

Grounding Pole:  

Negative pole 

Power Supply: 

40mA 

Actuator Continuous Current: 

Minimum 1A, Maximum 4.5A 

MPU:

Signal: 

2 ~ 120V RMS