J10015 5~10mm Micrometer (Lens With Microscope Stage) C Type 0.01mm Platform Experiment Equipment | Инструменты

J10015 5~10mm Micrometer (Lens With Microscope Stage) C Type 0.01mm Platform Experiment Equipment | Инструменты

If you like this item,please add it to your "Wish List",If you like our store,please add it to your "Store List".Thank you very much!!! ^-^

 J10015 5~10mm Micrometer (Lens With Microscope Stage) C Type 0.01mm Platform Micrometer Micrometer Experiment Equipment

Use of micrometer:

Sub micrometer eyepiece micrometer and stage micrometer, with the use of two feet. The eyepiece micrometer is a circular glass with a length of 5~10mm in the center and divided into a 50~100 lattice. The actual length of each representative varies depending on the magnification of the different objective lenses and the length of the different lens tubes. Stage micrometer is a slide central, with rubber seal fixed with a circular side micro ruler, 1~2mm long, is divided into 100 or 200 squares. The actual length of each lattice is 0.01mm (10 μm). When size measurement of cell with an eyepiece micrometer, you must use the actual length of the verification stage micrometer eyepiece micrometer each represent.

Usage method:

1. will be pulled out from the side of the eyepiece barrel, unscrew the eyepiece part below, the micro scale down side eyepiece mounted on the focal plane of the eyepiece of the surface, to unscrew the back part mounted mirror, then put the plug back into the eyepiece.

2. The mirror side of micro scale to put on the stage in the folder, which is located in the center of the field of micro division side. To see the mirror side indexing focusing micro scale.

3. be careful of mobile stage micrometer and rotating the eyepiece lateral side of micro scale, the two feet to the left of the line overlap, then line from left to right to find two feet of another coincidence.

4. record the coincidence of the two line between the eyepiece micrometer and the mirror side side of micro scale number. Calculate the actual length of each lattice of the eyepiece. The actual length = feet each grid represents the eyepiece (double suture stage micrometer lattice / double wire between the eyepiece micrometer lattice number) * 10um

5. remove the mirror side of micro scale, the need to measure the specimen change, with an eyepiece side of micro scale measuring specimens.