PT-721(100KHz 1200A)PINTECH replace A621 i1000s oscilloscope high current testing AC Current probe | Инструменты

PT-721(100KHz 1200A)PINTECH replace A621 i1000s oscilloscope high current testing AC Current probe | Инструменты

PT-721(100KHz,1200A)oscilloscope AC Current probe

Detailed description ：

AC CURRENT PROBE PT-721

1. 1200A current with high accurate measurement. Max. Clamp 52mm.

2.Isolated coaxial BNC cable, match any meter, data recorders and oscilloscopes. Can measure and show waves easily with mV signals output.3 ranges selection, can replace A621,i1000s,etc.

Current range

0.1A~20A

1A~200A

1A~1200A

Attenuation ratio

100mV AC/A AC

10mV AC/A AC

1mV AC/A AC

Accuracy

≤3%+10mV

≤2%+5mV

≤1%+1mV

Measurement condition

Measure condition：23℃±3℃，20~75%RH，Sinusoidal frequency 48Hz~65Hz，distortion <1%, No dc component，External magnetic field <40A/m, No ac magnetic field, the center of the test sample, load impedance≥1MΩand ≤47pF

Bandwidth

10Hz~100kHz(-3dB)

Max. dV/dt

10A/μs

Max. current

when <1kHz，1000A  Continuous current ,1200A(about forty minutes in the maximum )（if  the measuring time over twenty minutes ,it should be stopped）

Load impedance

≥1MΩ and ≤47pF

Rise/Fall time

≤40us

Working voltage

600V rms

Common mode voltage

600V CAT III

Stack DC current influence

≤30A DC,

Max. Jaw opening diameter

53mm

Max. Conductor size

Cable:max. Diameter:Ф52mm；Total wiring harness；single:5х5mm,Four bus wiring harness:30х5mm

Size

216х111х45mm

Weight

500g

About Probe:
We are oscilloscope probes manufacturer. PINTECH is our own brand. Our probes have standard BNC connector, which can be used with any brand’s oscilloscope. We offer OEM service to many brands’ oscilloscope. You can find some replace item for some brands’ oscilloscope probes with much more lower prices but good quality and service. Please leave me a message if you need further help. Battery is not allowed delivery,kindly buy batteries by yourself.

About delivery:
All of our products(except the customized items.)are in stocks. We will arrange delivery once we receive your order. We will arrange delivery by DHL/Fedex/UPS/TNT to make sure that you can get the probes as soon as possible. When you are making an order,please kindly make sure that the address and contact is correct. Do leave your correct tel.

About after-sales:
We will arrange retesting before arrange delivery. After you receive the probe,please kindly test it and once any question,please feel free to contact us.
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.