163мм Предварительно отверстный алюминиевый радиатор 75 Вт LED тепловой радиатор для COB CREE CXB3590 Bridgelux Vero29 gen7 Citizen clu048 1212 включен.

163мм Предварительно отверстный алюминиевый радиатор 75 Вт LED тепловой для COB CREE CXB3590 Bridgelux Vero29 gen7 Citizen clu048 1212 включен.

5,0

All stars

Pedi e paguei um dissipador de 163mm, enviaram um de 150mm. Confirmei a recepção há pouco tempo, mas acabo de ver que é o tamanho errado

Size

D(163MM)*H(70MM)*H(10MM)

Color

Can be customized

Material

AL1070

Usage

Led light cooling

Watts

70-85 watts

Product Keywords

pin fin heatsink cxb3590 led heat sink

Standard pin fin heat sinks are relatively new derivatives of the Aluminum heat sink. Unlike aluminum extrusion heat sinks, which contain an array of vertically oriented pins, Standard pin fins features pins that gradually bend outward. Curving the pins in this way increases the spacing between the pins and allows surrounding air streams to enter and exit the pin array more efficiently without sacrificing surface area.

The impact of increased pin spacing on heat sink performance is magnified at lower air speeds because weak air streams have less power to penetrate the array of pins. In low air speed environments and in natural convection, the increased spacing between the pins reduces the heat sink's thermal resistance by up to forty percent versus a aluminum extrusion profile heat sink. As a result, pin fins are recommended for low and moderate airspeed environments and for natural convection cooling.

Heat sinks are used to enhance heat dissipation from hot surfaces. A heat sink does this by increasing the surface area that is in contact with the cooling fluid or air.
From board level heat sinks, to LED heat sinks, to high power heat sinks,our goals are to provide you the best heatsink that is the most cost effective and highest quality. Our employees will see that we do whatever we can to make this happen.

Compatible with Bridgelux Vero 29 COB

1.Pre drilled for Bridgelux Vero 29 (not included)
2.Pre drilled for reflector adapter LEDiL C13584_CLAMP-VERO29 and LEDiL F13838_ANGELINA-XW (not included)
3.Pre drilled 100mm Glass lens with 112mm diagonal mounting positions. (not included)
4.4x M3 screw positions on outer perimeter and 2x M3  screw positions on sides for mounting heatsink

Compatible with Cree CXB 3590 COB

1.Pre drilled for Cree CXB 3590 with Ideal Holder 50-2303CR (not included)
2.Pre drilled for reflector adapter 50-2300AN and LEDiL F13838_ANGELINA-XW (not included)
3.Pre drilled 100mm Glass lens with 112mm diagonal mounting positions.  (not included)
4.4x M3 screw positions on outer perimeter and 2x M3  screw positions on sides for mounting heatsink