T-7000 15ml and T-8000 Epoxy Resin Multi Purpose LED Phone Screen Shell Repair Glue is Transparent | Канцтовары для офиса и

T-7000 15ml and T-8000 Epoxy Resin Multi Purpose LED Phone Screen Shell Repair Glue is Transparent | Канцтовары для офиса и

Capacity:T-7000 15ml and T-8000 15ML
Glial:Transparent,soft plastic, Strong sticky
Solid content:about 38%-50%
After curing Hardness:70-85T
Surface drying time: 3 minutes to 5 minutes or so positioning
Full cure time: 24-48 hours
Storage:Save at 10 to 28 degrees
Temperature range: -35 to 80 degrees
Concentration / viscosity: 3800mpa, s
Features: Not white，Not yellow，not stiff,Ultra-low odor,Low wire drawing，Curing fast.
Packing:1 PCS T-7000 15ml ML glue
 
Instructions：
1, before use carefully read the product description introduction.
2, in front of a large area, please do test a small area.
3,Make sure that the sticky surface clean and dry.
4, the optimum temperature should be between 18-32 degrees.
5, the product can be directly lid on demand is evenly coated surface of the adherend.
6, wait 3-6minutes, and the two are aligned adhesive sticky little pressure.
7, Put a few hours can be, 48 hours to reach the best condition.
8,When the product is not in use, please cover the lid, avoid glue and air contact after curing.

Precautions：
1, may be irritating to the skin and eyes.
2. Use in a well-ventilated environment.
3. In case of contact with eyes, rinse with plenty of water.
4. Keep away from children store, production operations, please stay away from fire.
5.Shelf life of 1 years, safe use of the product after the bottle.

Applicable to:
Paste adhesive can be more material on metal, glass, ceramics, stone, bamboo, cloth, leather, Shade, mobile door,ABS, nylon, sponge, film, fabric, electronic components, PE, PVC, PP and other plastic,Rubber, fiber, paper, paste mobile phone border, LCD screen and other materials have a good paste performance.