High quality laboratory test machine | Красота и здоровье

High quality laboratory test machine | Красота и здоровье

WGZA series of scattered light turbidity meter is used to measure the degree of scattering produced by insoluble particles suspended in water or transparent liquid, and the content of these particles can be quantitatively determined. Can be widely used in power plant, pure water, tap water plant, sewage treatment plants, beverage plants, environmental protection departments, industrial water, wine industry and pharmaceutical industry, epidemic prevention departments, hospitals and other departments of the determination of turbidity.

Technical index

Product model

WGZ-1S

WGZ-1A/20

WGZ-200

WGZ-800

Determination principle

90Light scattering light

Minimum display (NTU)

0.01

0.1

0.010.1

0.010.1, 1

Measurement range (NTU)

0~ 20

0~ 200

0~ 20, 0 ~ 200

0~ 20, 0 ~ 200, 0-800

Indication error

+ 8% (+ 2.5%F.S)

Repeatability

Less than or equal to 0.8%

Zero drift

+ 0.8%F.S

Product features

Pure water plant, low turbidity analysis, good stability, maintenance free

Universal type, wide measurement range, water plant dedicated, good stability

Power Supply

AC 220V/50HZ

Instrument weight

2.2KG

Outline dimension

400* 300 * 250MM

Matters needing attention

WGZA series of scattered light turbidity meter is a precision measuring instrument which combines the optical and electric. It should read the instructions carefully before operation and obtain accurate measurement results by correct operation.

1The use of the environment must be in line with the working conditions.

2The measuring pool must be clean and dry for a long time, no dust, no need to cover the cover.

3Use of wet weather, the boot time must be extended accordingly.

4The test solution should be carefully poured into the sample bottle, to prevent bubbles, affecting the accuracy of the measurement.

5, replacing the sample bottle or after maintenance must be re calibrated.

6Non professional maintenance engineer, do not open the instrument maintenance.

Working conditions

1.The instrument should be placed in the drying room, use temperature of 5 DEG C - 35.

2.Use should be placed on the level of the work table, and avoid vibration.

3.Indoor lighting should not be too strong, and avoid direct sunlight exposure.

4.Try to stay away from the high intensity of the magnetic field, electric field and the occurrence of high-frequency wave of electrical equipment.

5.Avoid high temperature close to the instrument.

6.Supply the power supply: 220V + 22V, 50 + 1Hz, and must be equipped with a good grounding.