【EU Free】3 Sets 2N.m Nema 23 Closed Loop Stepper Motor 2-Phase 288oz-in & Hybrid Servo Driver 6A 200Khz+350W 36V Power Supply |

【EU Free】3 Sets 2N.m Nema 23 Closed Loop Stepper Motor 2-Phase 288oz-in & Hybrid Servo Driver 6A 200Khz+350W 36V Power Supply |

Good News:We have warehouse in some countries, check as bellows

Package include:

3 x 57HSE76N  Servo motor 2N.m, 200Khz

3 x HSS57H  Servo driver

3 x 2M wire

3 x 350W 36V switching power supply

The manual will send to your email.

1.Nema23 Closed loop servo motor

Wiring:

Red:     A+

Green:  A-

Yellow: B+

Blue:    B-

2. HSS57 2-Phase Hybrid Stepper Servo Driver

2.1) Overview

HSS57 is 2 phase nema23 series hybrid stepper servo driver. It adopts new
generation 32 bit DSP and vector control technology, which can avoid the
stepper motor losing steps and ensure the accuracy of the motor. The
torque reducing is much lower than open loop stepper motor when it is at
higher speed. The high speed performance and torque are enhanced in a
great extent. Meanwhile the current control is based on the load, that
can reduce the motor temperature rising effectively, then can extend the
using life of the motor. The build-in place in position and alarm
output signal can help the upper monitor to monitor and control. The
function of position ultra difference alarm can ensure the machine work
safely. The closed loop system is an ideal improvement and a good
replacement of open loop system, Besides that, it also have some
function of AC servo motors, but price is just half of AC servo.

2.2) Features

2.2.1  Stepper motor closed loop system, never lose step.

2.2.2  Improve motor output torque and working speed.

2.2.3  Automatic current adjustment based on load, lower temperature rising.

2.2.4Suitable for all mechanical load conditions (include low rigidity belt
pulley and wheel), no need to adjust gain parameter.

2.2.5  Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration.

2.2.6  No vibration from high speed to zero speed.

2.2.7  Drive nema23 series closed loop stepper motor.

2.2.8  Pulses response frequency can reach 200KHZ.

2.2.9  16 kinds microsteps choice, highest 51200microsteps/rev.

2.2.10  Voltage range: DC24~50V

2.2.11  Over-current, over-voltage and position ultra difference protection function.

2.3 ) Electrical Parameter

Voltage range

DC24~50V

Peak current

Peak 6.0A (current change according to load)

Logic input current

7~20mA

Frequency

0~200KHz

Suitable motor

57HSE2N

Encoder lines

1000

Insulation resistance

>=500MΩ

2.4) Applications

Closed loop stepper system can be applied to all kinds small automatic
equipment and instrument. Such as engraving machine, special industrial
sewing machine, stripping machine, marking machine, cutting machine,
laser phototypesetting, graph plotter, cnc machine, automatic assembly
equipment and so on.