Аникубик ABS-Like+ смоляной 3D-принтер Rapid UV Curing 405 нм Conservation 1,5 года ABS высокая точность для LCD-принтеров.

Аникубик ABS-Like+ смоляной 3D-принтер Rapid UV Curing 405 нм Conservation 1 5 года ABS высокая точность для LCD-принтеров.

Anycubic ABS-Like Resin+

Tough and Easy to Post-process

Strong Formula | High Precision | Long Lasting

Specifications

Wavelength:365-405nm 

Elongationat break: 20-30%

Density:1.05-1.25g/cm3  

Shrinkage:3.72-4.24%
Viscosity: 220-250 cP or mPa·s

Flexural strength: 50-60 MPa

Surface hardness:84 HS     

Flexural modulus:1400-1,600MPa
Tensile strength:35-55 MPa      

Conservation period:18 months

Excellent tensile and bending strength

Adding PUA (polyurethane acrylate) to the formula gives the resin excellent tensile and bending strength as well as hardness and toughness.

Performance

Easy to clean/Easy to cure /Low odor

High temperature resistance  / Bending resistance

Accuracy

Accuracy: Printing accuracy up to ±0.1mm

Upgraded Formula, Low Odor

ABS-Like Resin+：52.11ppm   Standard Resin：68.04ppm

Wide Compatibility

Especially designed to be compatible with various LCD and DLP 3D printers.

Use Guide

(1) Before use:

Shake the resin well before use;

Clean the resin vat and the building plate, and make sure the bottom of the resin vat is transparent.

(2) When operating:

Unscrew the cap, pour the resin into the vat according to the quantity needed, and set the printer properly.

(3) After use:

After printing, please use the following tools for post-processing: scraper,  diagonal cutting pliers, tweezers, containers, gloves, Ethanol (≥95%), lactate or isopropyl alcohol cleaning solution.

(4) Post-processing:

A. Remove the finished print from the build plate with a scraper;

B. Clean and cure. We recommend to use the Anycubic Wash & Cure Machine for better results.

C. Remove supports, polish and paint, etc...