1 pc relay module with timer w3230-220v built-in | Электронные компоненты и принадлежности

1 pc relay module with timer w3230-220v built-in | Электронные компоненты и принадлежности

The module of electromechanical relay w3230-220v built-in allows you to activate the power device at the necessary interval of time. Specifications: Operating and коммутируемое voltage: 110 - 220 внастройка intervals of time: 0-999, 0-999 m, 0-999 чрабочий current <65 мамаксимальный current: 10 A size front part: 79x43x2mm case size: 72x39x24 mmsetting: short press button set:-you start time setting mode, the top scoreboard will flash. You can adjust the T1 and T2 time with + and-buttons. Save settings-wait 5 seconds after installation, the module will save to memory the changes you set. Press and hold the set button: If you want to start setting settings mode. There are two group parameters for your choice: P0 and P1. You can switch P0 or P1 with a short press set. In the parameters P0 and P1 you can set modes with + and-buttons. 1) the choice of one of the time regulators p0-0: Time mode in seconds: 0 - 999 s. p0-1: Time mode in minutes: 0 - 999 min. p0-2: Time mode in hours: 0-999h. 2) choice of one single (0-3) or cyclic modes (4-5) when supplied with power relay: p1-0: After expiry time t1 relay включитсяp1-1: Relay turn on at once and will power off after expiry time t1.p1-2: after the delay on the T1 time, the relay will turn on at t2p1-3 Time: The relay will turn on immediately at T1 time, then the relay will turn off Off Off Off p1-4: After Delay on T1 time, the relay will turn on, after the T2 time out, the relay will turn off, the mode is cyclic.