VER009S PCIe Riser Card 009S PCI-E PCI Express 1X to 16X Extender 0.6M USB 3.0 Cable SATA 6Pin Power For Video NEW | Компьютеры и офис

VER009S PCIe Riser Card 009S PCI-E PCI Express 1X to 16X Extender 0.6M USB 3.0 Cable SATA 6Pin Power For Video NEW | Компьютеры и офис

Package A Description

PCI-E Riser Card 009S for Bitcoin Miner
Version 009S riser kits are the newest and top of the line solution for setting up GPU mining rigs. 4PIN and Two Graphic card 6PIN interface are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards. 4 Solid Capacitors, 60cm USB 3.0 cable, Suitable for all Window systems, LINUX and MAC.

Note: As each batch of raw material may be different, The PCI-E riser card may be a little different on the appearance(Such as Solid capacitor, USB 3.0 cables, the PCI Express x16 slot, The Chip model,The Silk print), but the function is the same. RGeek promises testing each riser before the shipment!

Perfect to Set up Ethereum Mining Rigs
Board Dimensions: 130mm x 44mm x 12mm, 4PIN and Two Graphic card 6PIN Interface are Optional to Power
180 Degree PCI-E to USB Adapter, Easy to be Installed.
High Quality 60cm USB 3.0 Riser Cable (Blue or Black, send randomly ).
High Quality SATA 15 Pin to 6 Pin Power Cable

Package A Include

1x PCI-E 009s Riser Board,
1x PCI-E 1x Adapter Card
1x 60cm USB 3.0 Riser Cable
1x SATA 15 Pin to 6 Pin Power Cable

Package A Include as shown below

Package B Description

PCIe 1 to 4 Riser Adapter Card
Product Installation Instructions:
1. The first step, when you use the adapter card, the computer needs to be turned off before they can plug the adapter card.
2. The Second step, first of PCIe USB card plugged into the motherboard's PCIe slot. Use USB3.0 data cable adapter to connect the ends of the two USB port. Plug in the power supply.
3. The third step: After completion of the above two steps, first in no hurry to insert your PCI-E card, start the computer to see if your computer has been identified to the riser card, if you did not find the card, repeat the above operation (Note: The first time to insert card to start the computer, into the system in general will be prompted to install new hardware, such as "PCI standard PCI-to-PCI bridge" , you need to wait for it to automatically install the complete, individual anti-virus software will prevent these files installation, note skipped), when your computer has been recognized the card,blue LED PCI slot on normal light, computer equipment manager in the system device will show an increase of several "PCI standard PCI-to-PCI bridge.

After completing the above three steps, turn off the computer, plug in your PCI-E card, to be careful not to insert the contrary,
Then boot into the system, install PCI-E Card Driver.

Please note: PCI card Do not insert anti, anti-insert can easily lead to burn out.

Package B Include

1x PCIe 1 to 4 Riser Adapter Card
4x PCI-E 009s Riser Board,
4x PCI-E 1x Adapter Card
4x 60cm USB 3.0 Riser Cable
4x SATA 15 Pin to 6 Pin Power Cable

Package B Include as shown below

Package B Application mode as shown below

Product pictures