SONOFF RF BridgeR2 433MHz WiFi Signal Converter Door Window Sensor/ Motion Sensor Remote Controller Smart Home Alarm System | Электроника

SONOFF RF BridgeR2 433MHz WiFi Signal Converter Door Window Sensor/ Motion Sensor Remote Controller Smart Home Alarm System | Электроника

SONOFF RF BridgeR2 433MHz WiFi Signal Converter Door Window Sensor/ Motion Sensor RF Remote Controller Smart Home Alarm System

This RF BridgeR2 433 can convert most of the 433.92MHz RF Remotes into WiFi wireless. By adding the RF wireless Bridge to iOS/Android App eWeLink WiFi wirelessly, You can add up to 16 RM433 RF or alarms, also add them together (max. 16 items).
One 4 button remote controller can learn 4 devices, which means 64 devices supporting 433 MHz frequency can be added on the app through WiFi/2/3/4G network.

It can be used for most of the 433.92MHz RF Remote controlled products, like RF controlled switch, RF controlled socket, RF controlled bulb, RF controlled door opener, etc. You can set totally 8 schedule/countdown/loop timers to turn on/off the RF controlled products.

Even more exciting is that it will work with the 433.92MHz door magnetic sensor, 433.92MHz human body IR sensor, and more other 433.92MHz sensors to realize security alarm, and allowing you to DIY smart scenes. Note that the alarm push only comes in the owner's account, those users being shared can't view the alarm push.

The RF BridgeR2 can work with SONOFF DW2-RF wireless door/window sensor that allows users to set the smart scene for the sensor and the device to be controlled, then when you open/close the door, the device will be triggered on or off.

Note 1:
The receiving supports fixed code 433.92 frequency, like PT2260, PT2262, PT2264, EV1527, etc.
The product doesn't support to learn rolling code and dynamic code
You can't see device status changes in the App.

Note 2:
What's new on Android & iOS 2.5.0 and higher versions?

Scheduled/countdown timers are supported.
iOS App supports to add this product.
433MHz RF curtain switch and RF alarm are supported.

PIR3-RF Motion Sensor

It has 2 working modes:
--Alert Mode(default):
If motion is in the detection range,
it can be triggered every five seconds.

--Normal Mode:
The next alarm trigger can be activated (when detecting motion, it will be triggered) if there is no motion detected within one minute after the previous detection.

*The default is Alert Mode, you can change it by long pressing the small hole on PIR3-RF.

DW2-RF Door / Window Sensor

When it detects the opening status changed, it'll immediately push and alarm notification message to the app. Remind you when door/window is opened or closed. Keep linkage with SONOFF smart products for your easier smart life.