Pixhawk/PPZ/MK/MWC/PPM Encoder PPM encoder | Игрушки и хобби

Pixhawk/PPZ/MK/MWC/PPM Encoder PPM encoder | Игрушки и хобби

The function of the PPM encoder: The multiple independent PWM format signals output by the receiver are sequentially encoded into PPM format signals for output, so that the flight controller that supports PPM input can be connected in a single-wire manner. In order to save port resources or layout restrictions, many flight controllers only set the PPM signal input control port, which requires a PPM encoder to connect to the remote control receiver.

Power supply options:

1. The default power supply mode: the PPM encoder is powered by the flight controller, the remote control receiver takes power from the encoder, and the power source also comes from the flight controller;

2. If there is a special need to power the receiver independently, please disconnect the pad jumper on the encoder. Never use an independent power supply and a flight control power supply to power the receiver at the same time, otherwise the device may be burned.

Supply voltage: 5 V

Number of input channels: PWMx8

Output: PPM ×1 / MUX ×1

Dimensions: 28mm x 19mm x 5mm

Weight: 9g (including all input and output wires)