Original low temperature glue ACF removal liquid YH60 120 160 100ml COF glass green row cleaning | Обустройство дома

Original low temperature glue ACF removal liquid YH60 120 160 100ml COF glass green row cleaning | Обустройство дома

Original low temperature glue ACF removal liquid YH60 120 160 100ml COF glass green row cleaning

Instructions:

*Concentration: use the original solution at room temperature.

*Note: The liquid has strong acidity. When opening the bottle, do not directly contact the skin.

*Emergency measures: If you accidentally touch the skin, please wash it off with water immediately. If you touch your eyes, wash them with water and go to the hospital for treatment.

*How to use and matters needing attention

1. Partial ventilation should be required in the place of use. Do not use in the basement or poorly ventilated places.

2. Wear protective equipment such as gloves when in use

3. When opening the ACF remover bottle, because there may be a sudden appearance of internal GAS (especially in summer), the lid should be opened slowly. Please pour the ACF remover into a designated container for use.

4. Dip a cotton swab with ACF remover and apply it to the hardened ACF LCD, wait for about 20 seconds, wait for it to dissolve and expand, and wipe it gently with a cotton swab or dust-free cloth to clean it without hurting the ITO circuit.

Packing

Storage method: The solvent should be stored at room temperature.

Validity period: 12 months at room temperature (25℃)